L-shaped disarm camera

2021-June design

0-1 Design Studio

Designer: Li Wenkai

At present, the base of the low-cost card camera on the market only supports angle adjustment and supports the host. When the user needs to disarm, he needs to manually turn the camera or turn off the power. More convenient operation, the key is to completely close the camera detection surface.
Due to the cost limitation of existing products with the same positioning, it is impossible to use high-cost means such as motor steering to realize the physical disarm function. On the other hand, due to the height requirements of the camera base, the large size of the whole machine limits the optimization of packaging costs. Under the premise of the same cost of products of the same price, realizing the physical disarming function that only high-end products have, improving user experience and product competitiveness, while reducing product size and reducing transportation costs are our primary problems.

The L-shaped disarm camera adopts an L-shaped base, and the base and the main unit are folded to form a complete square, and the contact surface when folded forms a closed area for physical disarming. After folding, the shape is square and neat, the volume is small, and the packaging loss is reduced.

L型撤防摄像头

目前市面上低成本卡片式摄像头的底座仅支持角度调整和支撑主机, 当用户需要撤防时, 需要手动将摄像头转向或关闭电源, 目前没有针对这种情景做出创新操作体验的设计产品, 让用户更方便的操作,关键是能彻底的封闭摄像头侦测面。

在现有同定位产品因成本带来的受限, 无法采用电机转向等高成本的手段实现物理撤防功能，另一方面由于摄像头底座的高度要求, 整机尺寸较大导致包装成本优化受限。在同价位产品相同的成本前提下, 实现高端产品才有的物理撤防功能,提升用户体验和产品竞争力，同时缩小产品体积, 降低运输成本才是我们首要解决的问题。

L型撤防摄像头采用L形底座, 将底座和主机折叠后形成完整的方形, 同时折叠时的接触面形成封闭区域用于物理撤防。折叠后形态方正规整, 体积小, 减少包装损耗。

TheL-shaped disarm camera can realize horizontal angle adjustment and pitch angle adjustment, and the whole machine can be folded within the range of the pitch angle.

L型撤防摄像头能实现水平角度调整和俯仰角度调整, 在俯仰角度范围内可以实现整机折叠。